Home
Extended Baggage Kits
Selkirk Aviation offers seven extended baggage
kits. Newest items: extended baggage kit for Cessna 172 years 1963 to 1986 and extended baggage kit for Cessna select 206 and 207 models. Extended baggage kit #1: Fiberglass The fiberglass version has front and side supports which attach to bulkheads. The fiberglass kit comes without any side supports so there isn't any riveting required for installation. The metal version does come with side supports which need to be riveted through the fuselage during installation process. Both the fiberglass floor and metal floor sit approximately 8 inches off the floor of fuselage. Weight is 11 pounds. Optional side panels are 4 pounds each. Precut rubber insulation kit is $91.00 and weighs 4 pounds. Extended baggage kits, both metal and fiberglass kits, with rear battery are made to fit:
Optional extended baggage side panels - left & right - $175.00 each and weigh 4 pounds each. SA59-03 Fiberglass rear fuselage cover only -$168.00 at rear of area (replaces canvas from factory) and $155.00 for front jumbo fuselage cover (to close off extended baggage area. Jumbo fuselage cover is optional and not part of SA59-100 kit.) Fiberglass floor only -$520.00 Extended metal baggage kit #2 Individual component pricing: Optional extended baggage fiberglass side panels - left & right - $175.00 each. (Side panels weigh 4 pounds each.) Metal floor only - $636.00 Front floor support - $250.00 Rear floor support and angle side pieces - $250.00 Rear bulkhead cover - $168 - Kit pieces priced separately
SA59-03 Fiberglass fuselage cover only -$168.00 (to replace canvas piece from factory.) |
|
Fiberglass Products Cowlings
Extended Baggage Kits Glare Shields Interior Kits Nose Bowls  Image above is fiberglass kit installed with optional extended baggage side panels.Optional left and right side panels are additional $175 each.  Extended Baggage Fiberglass Kit #1 Fiberglass rear bulkhead cover not shown. $979.00  Extended Baggage Metal Kit #2 Fiberglass rear bulkhead cover not shown. $1,300.00 Metal kits come with front and rear floor supports, 2 side angle pieces, metal floor and fiberglass fuselage cover for rear bulkhead. |
Extended baggage kit #3: Extended baggage kit without rear battery are made to fit:
|
 Extended Baggage Fiberglass Kit #3 - $699.00 Optional fiberglass side panels (not shown) are an additional $175.00 each. |
|
Extended baggage kit in fiberglass only: Cessna 182 years 1962 to 1970 This kit comes with floor, rear fuselage cover, rear support, and battery cover. It is rated for 50 pounds. Total weight is 11 pounds. Adds 31 inches in length. Precut rubber insulation $119.00 for side walls. (No fiberglass extended baggage side panels available for this kit.) |
 Extended Bag Kit #4 - Fiberglass only $890.00 |
|
Fiberglass extended baggage kit SA59-100 Option 1 shown with hat rack in place. This is a crabtree red kit installed in a 1958 Cessna 182 owned by the Valley View Flying Club of Emmett, Idaho. Note the fiberglass floor was installed with the hat rack in place.
Extended baggage kit for 1971 - 1980 Cessna 182 models - Fiberglass only. It includes a rear fuselage cover and battery box cover. Total weight 3.5 pounds. Available for 12 and 24 volt systems. Adds 18 inches in length. Precut rubber insulation kit $67.00. (No fiberglass extended baggage side panels available for this kit.)
|
 Extended Bag Kit SA59-100 $979.00  1971 to 1980 Cessna 182 $404.00 |
|
Cessna 180 install with extra items: Extended baggage side panels installed in a late model Cessna 180 with factory metal extended baggage floor. Note the ELT and the brackets for a shelf. Also Selkirk Aviation has available a fiberglass cover for the rear seat belt harness holders for $30 each. Note horizontal bar has been removed and the headliner has been cut back and folded back behind bulkhead. This opens the bulkhead entrance from floor to ceiling. Selkirk does offer a front Jumbo fuselage cover for $155.00 to close off this extended baggage area for kit options 1, 2 and 3.
Here is 30 pounds of camping gear stuffed into the extended baggage area of Selkirk Aviation's airplane.
Extended baggage kit for Cessna 172 series aircraft years 1963 to 1986. Includes floor and rear bulkhead cover and comes in 11 gel coat colors. Cost $936.00. Total weight 10 pounds and it is rated to hold 50 pounds.This is part no. SA64-100. (No fiberglass extended baggage side panels available for this kit.) Precut rubber insulation available for this area for $66.00. The picture at right shows the Extended baggage kit 6 closed up with aft baggage panel part no. SA60-14, which is sold separately at $130.
Extended baggage kit for Cessna 206 years 1966 to 1973 and Cessna 207 years 1966 and later. Includes floor and rear bulkhead cover and comes in 11 gel coat colors. Cost $582.00. Total weight 5 pounds and it is rated to hold 25 pounds. This is part no. SA65-100. The floor extends 14 inches back. (No fiberglass extended baggage side panels available for this kit.) Rubber side kit available.
|
Please feel free to write or call for information
on Selkirk Aviation's Fiberglass Interior Kits or other fiberglass
aircraft parts. |
|
Repair Station LOGR640X
3805 Industrial Ave. - Coeur d'Alene, Idaho 83815
208.664.9589 | FAX: 208.665.9597 | Voice Mail: 800.891.7687
© 2009 - Selkirk Aviation
design: wordsmith